User Manual LYNXEYE XE Detector
1-2 DOC-M88-EXX240 V1 – 03.2014
1.1 Qualified Personnel
The LYNXEYE XE™ may only be set up and operated in conjunction with this manual. Only personnel
authorized by Bruker AXS is allowed to work on this equipment. All repairs, adjustments and align-
ments performed on any components of the LYNXEYE XE must be carried out strictly in accordance
with the established safety practices and standards of the country where the equipment is installed.
1.2 Correct Usage
This device and its components may only be used for the applications described in this manual and
only in connection with devices or components from other manufacturers which have been approved
or recommended by Bruker AXS.
This product can only function correctly and safely if it is transported, stored, set up and installed cor-
rectly and operated and maintained as recommended by Bruker AXS. Protection provided by this
equipment may be impaired if it is used in a manner not specified by Bruker AXS.
1.3 X-ray Equipment
Warning
X-ray equipment produces potentially harmful radiation and can be dangerous to anyone in
the immediate vicinity unless safety precautions are completely understood and imple-
mented. All persons designated to operate or perform maintenance need to be fully trained
on the nature of radiation, X-ray generating equipment and radiation safety. All users of the
X-ray equipment are required to accurately monitor X-ray exposure by proper use of X-ray
dosimeters.
For safety issues related to the operation and maintenance of your particular X-ray generator, diffrac-
tometer and shield enclosure, please refer to the manufacturer operation manuals or your Radiation
Protection Supervisor. The user is responsible for compliance with local safety regulations.
The LYNXEYE XE detector itself is no source generating X-rays, it just senses X-rays.
To Next Page
Loading...
Need help?
General
