User Manual LYNXEYE XE Detector
6-2 DOC-M88-EXX240 V1 – 03.2014
LYNXEYE_XE_Diff_Align_Mo_Ag_Tube.bfscn (Low Gain)
Note
Mind that ‘Zero Offset’ and ‘Resolution’ does not fit to your detector radius and needs to be
determined.
1. From the main CONFIGURATION plugin, select the Secondary Track. A ‘DetectorMount’ is ex-
pected to be configured (Figure 6.1).
Figure 6.1: Detector menu in CONFIGURATION plugin before inserting the LYNXEYE XE template
2. Insert a LYNXEYE XE template of your choice, depending on your x-ray wavelength and applica-
tion type (High –energy- Resolution or High Count Rate’), e.g. ‘LYNXEYE XE_Diff-Align_Cu-Cr-Co-
Fe-Tube.bfscn’ (Figure 6.2).
To Next Page
Loading...