To Next PageTo Next Page
Need help?Do you have a question about the Bruno SRE-2750 and is the answer not in the manual?
General| Brand | Bruno |
|---|---|
| Model | SRE-2750 |
| Category | Mobility Aid |
| Language | English |
Details on product certification for Canadian and US standards.
Installer's role in reporting malfunctions and training users for FDA-regulated devices.
Information on obtaining material safety data sheets for unit components.
Recommended torque values for various bolt sizes in US and metric.
Initial assembly steps and determining the correct rail length and placement.
Steps to determine staircase angle, dimensions, and rail length.
Using the application details table for seat height based on angles.
Instructions for cutting and preparing two-piece stairlift rail sections.
Drilling mounting holes for charge strips on the stairlift rail.
Assembling the rail joint and positioning foot clamp assemblies.
Installing clamp wedge locks for secure rail mounting when the floor is not contacted.
Mounting the carriage onto the rail and adjusting its angle for proper operation.
Procedures for converting the unit from left-hand to right-hand installation.
Installing the stairlift seat assembly onto the carriage.
Installing the final limit ramp and switch to control carriage travel.
Understanding the circuit breaker's role as an on/off switch and safety feature.
Connecting charge contact strip blocks to the rail and power source.
Routing and connecting the battery charger to the rail and power outlet.
Interpreting the LED indicators on the battery charger for status.
Steps for replacing the AC input fuse in the battery charger.
Understanding the IR system and its potential interference issues.
Procedures for mounting the standard or optional IR call/send transmitters.
Testing the functionality of the call/send transmitters.
Overview of the circuit board's diagnostic modes and audio feedback.
How to change the PCB diagnostic mode using DIP switches.
Procedures for relearning or adding infrared remote transmitters to the unit.
Steps to test the stairway elevator's operation and safety features.
Applying white lithium grease to the gear rack teeth for proper lubrication.
Procedure for adjusting the seat height to optimize user comfort.
Eliminating the gap between seat post and footrest covers by adjusting seat height.
Selecting one of four possible seat swivel configurations by changing screw positions.
Steps to convert the unit from left-hand to right-hand installation.
Relocating the rocker switch to the left armrest for right-hand operation.
Procedures for safely powering down the unit for extended periods.
Steps to reactivate the unit after long-term storage.
Recommended yearly maintenance checks and procedures for the stairway elevator.
Exploded view and parts list for the adjustable clamp set assembly.
Exploded view and parts list for the SRE-2750 rolling display assembly.
Warranty coverage for major components like motor, gearbox, and rail.
General terms, limitations, and procedures for the stairlift limited warranty.
