23
Programming the Thermostat
6. You will see the hours in 6:00 AM flashing on the screen. Press the
up or down button and stop on the desired time.
7. To change the minutes, press the
start time button on the bottom
of the screen again. You will see the minutes in
6:00 AM flashing
on the screen. Press the
up or down button and stop on the
desired time.
The “stop time” for period 1 (P1) is also the “start time” for period 2
(P2). To change the stop time for P1 – which means you are also
changing the start time for P2 – use the instructions in the next
step to change the start time for period 2.
8. To change the start time for period 2 (P2), press the
period button at the bottom of the screen twice. This
displays the information for period 2, with
P2 flashing
on the display.
9. You will see the hours in
8:00 AM flashing on the screen.
Press the
up or down button and stop on the desired time.
To Next Page
Loading...
Need help?
General
