Programming the Thermostat
26
Assigning time periods to temperatures
To get the most from your thermostat’s programming features, you will
want to take the remaining steps that will link your four schedule time
periods (P1, P2, P3 and P4) to the heating and cooling temperatures
you set with the Touch ‘N’ Go buttons –
home, away and sleep.
Taking these final steps will be easier if you complete the grid below
before programming the thermostat. It will help you decide how you
want to assign the comfort temperatures you’ve selected for home,
away and sleep to the time periods you’ve established. The completed
grid will help you keep track of your information as you work with
the thermostat.
Here’s an example of how this would look using the factory-set
periods and Touch ‘N’ Go options.
Pre-set Period
Start Time
Period Number
Pre-set Touch ‘N’ Go
Option for Each Period
6:00 AM 1 Home
8:00 AM 2 Away
5:00 PM 3 Home
10:00 PM 4 Sleep
To Next Page
Loading...
Need help?
General
