Operating the Thermostat
30
Using Touch ‘N’ Go buttons
Once you have set the temperatures and time periods that correspond
with your three Touch ‘N’ Go comfort buttons (see
Programming the
Touch ‘N’ Go feature
, page 14, and Assigning time periods to
temperatures
, page 27), you won’t need to use your Touch ‘N’ Go
buttons unless you want to make a temporary change. For example, if
you go to bed earlier than usual, pressing the
sleep button will lower
the temperature sooner than scheduled. If you go to bed later than
usual, pressing the
home button will keep the home warmer past your
usual bedtime but you’ll need to press
sleep before you go to bed.
To make a temporary change
1. Open the door.
2. Press the
home, away or sleep button that you want. You will see
the words
temporary hold on the display and the triangle icon ( )
over the button you’ve selected. The system will change
to the temperature setting programmed for that lifestyle
period. It will maintain that temperature setting until the
start of the next programmed cycle.
To Next Page
Loading...
Need help?
General
