Programming the Thermostat
29
7. Press home, away or sleep.
8. Press the
period button twice. P3 will flash on the display.
9. Press
home, away or sleep.
10. Press the
period button twice. P4 will flash on the display.
11. Press
home, away or sleep.
12. If you did not select
all days when you started this process, then
repeat all the steps for your remaining timeframe choice –
weekdays or weekends.
13. To confirm that the thermostat has accepted your changes, cycle
through the four time periods by pressing
days, selecting your time
frame –
all days, weekdays, or weekends – and then pressing the
period button to see the Touch ‘N’ Go option assigned for each
start time. Each time you press
period, you will advance to the next
start time.
14. Press
done or close the door.
To Next Page
Loading...
