11
Quick Start
Changing the temperature
There are times when you want to change the temperature.
Here’s how.
1. Open the door.
2. Press the
up or down buttons on the right side until
you reach the desired temperature setting. This
creates a “temporary hold” until the next pre-set time
period. You will see
temporary hold on the display.
(To switch from the cooling temperature to the heating
temperature – or vice versa – press the
mode button
on the left until the word heat or
cool is flashing.)
3. To maintain that temperature setting so it doesn’t
change during the next pre-set time period, press
the
hold/run button on the left side. The display will
show
hold. The temperature will stay at the setting
you selected until you release the hold.
4. To return the temperature to the pre-set level for that time period,
press
hold/run. This releases the hold and the temperature will return
to its programmed level.
5. Close the door.
To Next Page
Loading...
Need help?
General
