Bryant Legacy User Manual

Advanced Programming Options
39
Changing from Fahrenheit to Celsius
Your thermostat is preset to display the temperature in degrees
Fahrenheit. You can change this to Celsius.
1. Open the door.
2. Press and hold the
home and sleep buttons under the
display simultaneously for about three seconds.
3. Press the
mode button on the left to change it from
F (Fahrenheit) to C (Celsius).
4. Press the
done button on the lower right.
5. Close the door.

Bryant Legacy Specifications

General

Battery Type	AA Alkaline
Humidity Control	No
Wi-Fi Capable	No
Type	Thermostat
Display	Digital
Programmable	Yes