To Next Page

To Previous Page

Advanced Programming Options

Keypad lockout

The keypad lockout feature lets you “lock” the thermostat so

nobody can change the temperature – or make any other changes –

by pressing buttons. Keypad lockout is not activated when the

thermostat is installed. Here’s how to activate it.

1. Open the door.

2. Press and hold the

home and sleep buttons under the

display simultaneously for about three seconds.

3. Press the

up button at the top right of the display.

You will see

. (If you don’t, continue to press the

mode button, cycling through the options until you

get to

4. Press the

mode button on the left. You will see

and

beneath a

padlock icon

. This indicates that

the keypad is now locked.

5. Press the

done button on the right.

6. Close the door.

Bryant Legacy User Manual

Questions and Answers: