9
Quick Start
Setting the temperatures for heating and cooling
Your thermostat is installed with pre-set heating and cooling temperature
settings. You can use these or change them so your home is as warm or
as cool as you’d like it to be. These steps will hold the temperature where
you set it. For the temperature to change automatically according to your
lifestyle needs – whether you’re home, away or asleep – you’ll need to
follow the Touch ‘N’ Go instructions on pages 14 – 20.
1. Open the door.
2. Press the
up or down button located on the right side of
the display. You will see the preset temperature
settings for heating and cooling. The word
heat will flash.
3. Press the
up or down button to change the heat
setting. Stop on the correct setting.
4. Press the
hold/run button.
To Next Page
Loading...
Need help?
General
