Using the phone
21
If you need some help, call us on 0800 145 6789 or go to bt.com/producthelp
Turning the handset ringer
on or o
1. Open the main menu by pressing
, then scroll through to Personal
Set using
and press .
2. You’ll see Handset Tone on the
display screen, press
.
3. Ring Volume is displayed,
press
.
4. Use
and again to scroll
through to Ringer o and press
.
Finding your handset (paging)
If you can’t nd a handset, you
can ring it using the base. If you get
a call while using paging, the call
will take priority. If you’ve switched
your ringer o, it’ll be temporarily
switched back on during paging to
help you nd your handset.
1. Press
to ring all of the
handsets registered to the base. The
display screen on each handset will
show Paging for up to 30 seconds.
When you’ve found your handset,
press
again to stop the ringing.
To Next Page
Loading...
Need help?
General
