BT Essential Phone Single - The Block Button

Block nuisance calls
24
2. Incoming call
When you have an incoming call,
before pressing the
to answer,
look at the handset display and
you can see who is calling. If you
don’t want to take the call press
the
on the handset and the call
will be transferred to the answering
machine for the caller to leave a
message.
The number will be blocked and
added to the blocked calls list if
Caller ID is displayed. If the number
calls again your phone will just ring
silently and the caller cannot leave
another message.
If you listen to the caller’s original
message and decide that the caller
is not a nuisance caller and you want
to receive future calls from them,
you can remove them from the
blocked numbers list.
3. During a call
If you have already answered the call
and you want to block the number
press
, if the number is displayed
in the Caller ID, press
to block
the number, it will then be added
to the blocked numbers list and end
the call.
3. Press
until Blacklist is shown,
then press
. Block mode is
displayed. Press
.
4. Press
or to your
chosen option.
5. Press
.
6. Then scroll using
or to Start
& end, press
then using the
keypad enter the start time press
, then enter the end time and
press
.
Delete numbers from the Block
List or to Unblock a number
1. In idle mode, press
.
2. Enter your access PIN and press
.
3. Press
until Blacklist is shown
and press
. Press until Block
number is shown, then press
.
4. Scroll to Delete, press
, then
use
or to select the number
you want to delete.
5. Press
, Conrm? is shown,
press
.
The Block button
The block call button can be used in
3 ways:
1. In idle mode
Press
as a shortcut to the
Call Block menu.