BT Essential Phone Single - Base Unit Configuration

47
If you need some help, call us on 0800 145 6789 or go to bt.com/producthelp
Base settings
Choose from 5 base ringtones.
The default base ringtone is
Melody 1.
There are 4 base ringer
volume levels, Low, Medium,
High and Melody O.
The default is Medium.
Setting the base ringtone
1. Press
and then scroll through
to Personal Set. using the
and
buttons. Press
.
2. Press
until you get to Base
Tone and press
.
3. Base Melody will show on the
screen. Press
.
4. The base will play your current
ringtone. Press
and to choose
between ve dierent ringtones,
then press
.
Setting the base ringer volume
1. Press
and then press to scroll
through to Personal Set.
Press
.
2. Press
until you get to Base
Tone, then press
.
3. Press
to scroll through to Base
Volume. Press
.
4. The base will ring at its current
volume. Use
and to choose
the volume you want.
5. When you’ve chosen the right
volume, press
to save your changes.
Change the system PIN
To change some of the settings on
your phone, you’ll need to give your
access PIN. This is a four-digit number
and the default is set to 0000.