Buderus Logamatic 2107 Installation And Service Instructions

8 Heating circuit data
8.1 Heating system
The controls is designed for 2 heating circuits. The basic 2107 supports 1 heating
circuit, which can be upgraded to 2 heating circuits using the FM241card.
– Circuit 01 = unmixed heating circuit, no heating circuit, perimeter heating
– Circuit 02 = mixed heating circuit, no heating circuit, perimeter heating, radiant
floor heating
The factory setting is:
If the right heating system is selected, the other heating circuit parameters are
preset. They must still be verified, however.
Further information on this can be found on the next page.
Circuit 01 Perimeter heating
Circuit 02 Radiant floor heating
Logamatic 2107 controls - We reserve the right to make any changes due to technical modifications. 29
8
Heating circuit data

Buderus Logamatic 2107 Specifications

General

Category	Control Systems
Type	Heating Control Unit
Voltage	230 V
Frequency	50 Hz
Protection class	IP20
Ambient temperature	0°C
Application	Heating systems