Buderus Logamatic 2107 Installation And Service Instructions

15 Time, correcting the accuracy
Here you can set the time accurately to the second.
The factory setting is "0" seconds/day.
Define the deviation in seconds/day.
+
Press the "Display" key and "Install" key at the same time to call up the service
level. "AMERICAN" appears as the first main menu.
Turn the dial until "TIME" is shown.
+
Hold down "Display" and turn the dial until the identified deviation appears in the
display, e.g.: if it is 10 s/day fast, then set to -10 s/day.
Release "ENTER" to store your input.
Press the "Display" key to return to the next higher level.
0
TIME
-10
TIME
Input range Factory setting
Time
-30 seconds/day – +30 seconds/day 0
Logamatic 2107 controls - We reserve the right to make any changes due to technical modifications. 53
15
Time, correcting the accuracy

Buderus Logamatic 2107 Specifications

General

Category	Control Systems
Type	Heating Control Unit
Voltage	230 V
Frequency	50 Hz
Protection class	IP20
Ambient temperature	0°C
Application	Heating systems