Buderus Logamatic 2107 Installation And Service Instructions

If the remote control is active, the desired room temperature for day and night
mode must be entered on the remote control, rather than via the controls.
All settings can then only be made via the remote control.
The "AUT", "Day mode" and "Night mode" keys on the controls also are disabled
for this heating circuit with remote control.
If you press the "Temp", "AUT", "Day mode" or "Night mode" key,
"REMOTE" appears on the display if the remote control is active.
Input range Factory setting
Remote control
OFF
ON
OFF
Logamatic 2107 controls - We reserve the right to make any changes due to technical modifications. 37
8
Heating circuit data

Buderus Logamatic 2107 Specifications

General

Category	Control Systems
Type	Heating Control Unit
Voltage	230 V
Frequency	50 Hz
Protection class	IP20
Ambient temperature	0°C
Application	Heating systems