Buderus Logamatic 4122 User Manual

Extended functions
7
Logamatic 4121, 4122 and 4126 - Subject to technical modifications.
35
Press and hold down "Temperature". First, the heating circuit whose
temperature you want to adjust is displayed. After approximately 2 seconds,
the
display will show the currently selected temperature and operating mode.
Adjust the temperature for the heating circuit with the rotary selector
(here:
"21°C").
Release the key to save your input.
The day room temperature is now adjusted to 21 °C. The selected permanent
display will then appear again.
+
Set room
Automatic day
21°C
USER INFORMATION
If you want the adjust the temperature for an operating mode that is not the
current mode, first select the corresponding operating mode (e.g. by pressing
"Night mode"). After modifying the temperature, reset the operating mode to
the previous setting.
USER INFORMATION
For heating circuits with individual remote control units (e.g. BFU),
you
can adjust the room temperature only via these units
(Æ
see remote control instructions).

Buderus Logamatic 4122 Specifications

General

Brand	Buderus
Model	Logamatic 4122
Category	Control Unit
Language	English