Extended functions
7
Logamatic 4121, 4122 and 4126 - Subject to technical modifications.
43
Next switching point
Continue to turn the rotary selector until the next switching point is displayed.
The next switching point (Tuesday, 05:30 h) appears.
Also change the following switching points to 06:30 and 23:00 h. The system
will
now heat from 06:30 h to 23:00 h Monday to Thursday.
Press "Back" to return to the permanent display.
The modified standard program is saved under "Own" and the number
of
the heating circuit.
USER INFORMATION
You can change the weekday if you press "Weekday" instead of "Time".
You can change the switching state ("ON"/"OFF") by pressing "Display"
instead of "Weekday" or "Time". The operating mode determines the switching
state: "ON" = day mode; "OFF" = night mode.
z Ensure that a stop point is associated with every start point.
To Next Page
Loading...
