Buderus Logamatic 4122 - Page 42

Extended functions
7
Logamatic 4121, 4122 and 4126 - Subject to technical modifications.
42
Hold down "PROG" and select the required standard program with the rotary
selector.
Release "PROG".
The first switching point (Monday, 05:30) appears.
Hold down "Time", and select the required time with the rotary selector.
Example: "06:30".
Release "Time". The newly adjusted time for the "ON" switching point is now
saved.
The modified switching point will be saved under the "Own" program and
the
number of the heating circuit (here "2").
Continue to turn the rotary selector, until the next switching point that you want
to change is displayed.
The "OFF" switching point for Monday appears. Now you can modify the time
for
the "OFF" switching point.
Hold down "Time", and select the required time with the rotary selector.
Example: "23:00".
Release "Time". The newly adjusted time for the "OFF" switching point is saved.
+
Time switch
Program select.
Family
Family program
Monday
21°C
at 05:30
+
Own program 2
Monday
21°C
at 06:30
+