46
Installation and maintenance instructions Logano G334 X gas-fired boiler • Issue 09/2005
We reserve the right to make any changes due to technical modifications.
Boiler inspection and maintenance13
13.8 Maintenance protocol
Please check off the maintenance work as it is completed and record the measured values.
Follow the instructions on the following pages.
Maintenance work Page Date: Date:
1. Inspection of the flue system including
combustion air, inlet and outlet openings
page 39
2. Inspection of boiler page 39
3. Inspection of burner page 39
4. Cleaning boiler page 40
5. Cleaning burner page 43
6. Measuring gas supply pressure page 29
–––––––
inches W. C.
–––––––
inches W. C.
7 Measuring manifold pressure page 33
–––––––
inches W. C.
–––––––
inches W. C.
8. Checking for leaks in operating condition page 29
9. Checking pilot and main burner flame page 34
10. Check maximum aquastat page 43
11. Check the area around the boiler for
flammable materials, gasoline or other
corrosive liquids.
page 43
12. Confirm maintenance
Confirmation of correct maintenance
(company stamp, signature)