Safety1
6
Installation and maintenance instructions Logano G334 X gas-fired boiler • Issue 09/2005
We reserve the right to make any changes due to technical modifications.
1.4 Tools, materials and accessories
You need standard tools for the installation and
maintenance of the boiler as used in heating system
installation and oil, gas and water installations.
The following additional items will also be useful.
– Boiler cart with rope or Buderus boiler cart
– Cleaning brushes and/or chemical cleaning agents
for wet cleaning
1.5 Disposal
z Dispose of the packaging material in an
environmentally compatible fashion.
z Dispose of any components of the heating system
that require replacement in an environmentally
compatible fashion.
WARNING!
RISK TO LIFE
by poisoning.
When working on the flue gas monitoring
equipment leaking flue gas may endanger
the lives of people.
z Do not attempt to repair the flue gas
temperature sensor.
z Use only original parts when replacing
parts.
z When replacing the flue gas
temperature sensor install the new one
in the specified position.
WARNING!
RISK TO LIFE
by poisoning by leaking flue gas.
If the flue gas monitor trips frequently,
there may be a problem with the chimney
or the flue gas venting.
z If the flue gas monitor trips frequently
the fault must be corrected and a
function test must be conducted.
WARNING!
RISK TO LIFE
by poisoning by leaking flue gas.
z Make sure that the boiler is not fitted
with a thermally controlled flue gas
baffle after the back flow check.
WARNING!
FIRE DANGER
due to flammable materials or liquids.
z Make sure that there are no flammable
materials or liquids in the immediate
vicinity of the boiler.
To Next Page
Loading...
Need help?
General