Buffalo LS-XHL - Page 39

Chapter2 Using your LinkStation
LinkStation Setup Manual
3838
• Using in RAID 1 mode
1
Change system to normal mode (page 41).
2
3
4
5
6
The confirmation screen will appear. Enter the number shown in the [Confirmation Number]
eld within 60 seconds, and click [Apply].
7
Follow the instructions displayed on the screen.
You have set up a RAID 1 array. Turn to page 22 to create a shared folder.
Navigate to [System] - [Storage] - [RAID Array] in
the Web Admin tool.
Click the array you want to congure.
Select both drives.
1 Select [RAID 1].
2 Click [Create Raid Array].