50
2 Tap Dismount.
3 When the completion message is displayed, unplug the USB device and tap OK.
Checking Drives
A disk check tests the data on a drive in the LinkStation or connected via USB for integrity. Errors are fixed
automatically. With large drives, a disk check may run for many hours. Shared folders cannot be accessed during a
disk check. Do not turn off the LinkStation until the disk check is finished. Follow the procedure below to run a disk
check.
1 In Advanced Settings, click Drives.
2 Click Drives to check an internal drive or USB Drives to check an external drive.
To Next Page
Loading...
