Cutting Unit CU and EGW
SnackFix
TM
2018-05 V1.8 23
Feeding Belt
With the input field „Feeding Belt” the nominal speed “m/min” is entered. The
input of the speed is limited.
Discharge Belt
With the input field „Discharge Belt” the nominal speed “m/min” is entered. The
input of the speed is limited.
Product Width
The Product Width of the individual products can be entered directly via the
keyboard. The entry of the cutting length is limited.
Cuts/min
This field shows you the actual cutting frequency. Depends on the working set-
up of the cutting machine.
EGW
The screen „EGW” is selected
To Next Page
Loading...
