Visualisation screen and operation
SnackFix
TM
2018-05 V1.8 9
3.1 Visualisation functions and operating elements on the operator panel
Indicator field: This shows the machine status and the set parameters.
Selection window: This field allow the changing between the modes of the
machine part.
Operating field: These fields control the operating units (electric and
pneumatic drives). The operating fields are actuated via
the touch field.
Input field: These fields allow the numerical entry of process pa-
rameter and nominal values. The Input fields are actuat-
ed via the touch field.
Screen change: By pressing the corresponding function touch field the
screens can be changed.
Emergency stop Reset: Button Acknowledgement after pressing
Emergency Stop
Emergency stop button: Emergency Stop of the machine
To Next Page
Loading...
