Buhler SnackFix - Securing and Switching off the Plant During Maintenance and Repair

Safety
SnackFix
TM
2018-05  V1.8 6
1.5 Securing and switching off the plant during maintenance and repair
Switch off the plant at the main switch before beginning maintenance or repair
work.
Secure the main switch with a lock against unauthorized switching on again.
Keep the key in a safe place. Act very carefully, if you do not switch off the plant
at the main switch due to necessary work (e.g. function control).
Call in a second person, who operates the main switch in the case of emergen-
cy, e.g. if work has to be carried out on live parts.
If the protective and safety equipment for the above mentioned work had to be
removed, they always have to be installed again afterwards and checked that
they function properly. This is particularly important for:
- Covers
- Safety instructions
- Warning signs
- Grounding cables
Watch and supervise the plant. If the plant shows any faulty behaviour after
switching on, it has to be switched off again immediately.