How to troubleshoot Buhler DFTA 12 that does not start?
If your Buhler Industrial Equipment doesn't start, there are a few potential reasons. First, check that the vibrator motor is receiving power. If not, verify the power supply. Also, ensure the safety switch is in the “ON” position. Finally, the vibrator motor may have overheated; allow it to cool down and investigate the cause of the overheating.
What to do if Buhler DFTA 12 Industrial Equipment is switched off via limit switch?
If your Buhler Industrial Equipment is being switched off by the limit switch, the issue could stem from several causes. A defective vibrator motor could be the culprit, requiring replacement. Alternatively, the centrifugal weights of the vibrator motors might be configured incorrectly, or one vibrator motor could be turning in the wrong direction, requiring a change in rotation direction.
General| Brand | Buhler |
|---|---|
| Model | DFTA 12 |
| Category | Industrial Equipment |
| Language | English |
To Next Page
