2 Throw sifter
DFTA-66620-2-en-1803 © Copyright 2018 Bühler AG
Preface
The operating instructions have to be handed over to those persons who are
responsible for the operation and the supervision of the machine.
This operating manual includes the information necessary for the operator for instal-
lation, operation and maintenance.
We have refrained from describing tasks requiring no special knowledge.
Instructions for repairs exceeding the normal maintenance tasks are not provided.
Important information
• Procedures upon receipt
Inspect the equipment visually in accordance with the delivery contract as soon
as it has been received.
•Storage
Equipment that is not installed immediately must be stored protected from
weather and other influences.
• Installation
The assembly and installation of the machine and machine equipment must
only be carried out by observing all installation instructions provided.
• Design variants
If different designs are described in the documentation provided, only the infor-
mation concerning the version supplied will apply. We reserve the right to make
modifications due to technical progress up to the time of delivery.
• Duty of instruction
Only trained specialists are permitted to commission the system or carry out
maintenance work on it. Prior to initial start-up, the operating personnel are
required to become familiar with the documentation provided.
Additional documents
Designation Identification number
Spare parts catalog DFTA-8011-1
To Next Page
Loading...
