Throw sifter Decommissioning 39
© Copyright 2018 Bühler AG DFTA-66620-2-en-1803
8 Decommissioning
8.1 Disassembly
When decommissioning the machine (for overhaul, dismantling or disposal pur-
poses), disassemble it by following the installation steps in reverse order.
• Before beginning the disassembly work, the person in charge must obtain the
corresponding instructions for safe disassembly from the manufacturer.
• The machine may be disassembled only in observance of all accident preven-
tion measures and only by trained personnel. These personnel must be familiar
with all relevant safety precautions.
8.2 Disposal
Dispose of the machine and its components in accordance with your locally applica-
ble codes and regulations.
When decommissioning the machine indefinitely, dispose of all components and
materials in an environmentally responsible manner and recycle whenever possible:
• Liquids (diesel, motor oil, gear oil etc.)
• Hazardous waste (batteries, electronic parts)
• Remove and separate plastic parts.
• Pre-sort metal parts by type of metal.
To Next Page
Loading...
