Throw sifter Maintenance 33
© Copyright 2018 Bühler AG DFTA-66620-2-en-1803
7 Maintenance
Only personnel who have been trained and authorised to do so may perform main-
tenance work on the machine.
7.1 Maintenance plan
7.2 Cleaning
Clean the machine according to the product and requirements.
Danger!
Never perform any maintenance, cleaning or overhaul work unless the
machine is at a complete standstill (all machine movements have been
stopped).
The lockable safety switch, which interrupts the power at all poles, must be
set to “0” and locked.
Caution!
Carrying out maintenance work correctly is the prerequisite for safe and trouble-
free operation.
Interval Machine part Action
Vibrator motor See manufacturer’s operating instructions
To Next Page
Loading...
