Buhler DFTA 12 - 2 Description; Identification; Identification Plate; Specification Key

Throw sifter Description 9
© Copyright 2018 Bühler AG DFTA-66620-2-en-1803
2 Description
2.1 Identification
2.1.1 Identification plate
The data indicated by “” have been imprinted on the identification plate according
to the specific machine.
2.1.2 Specification key
2.1.3 Design variants
Note:
Do not remove or cover up the identification plate.
Fig. 2.1
II */** EEx * T=*°C *
2
3
4
1
(1) Place of manufacture
(2) Type
(3) Machine No.
(4) Definition of ATEX ID
DFTA – 12
DFTA – 12 - Ex
Machine approved for use in potentially explosive
zone
Sieve area per sieve bottom = 1.2 m
2
Code
Machine type
Sieve area per sieve bottom
[m
2
]
12 1.2
13 1.3
23 2.3