12 Description Throw sifter
DFTA-66620-2-en-1803 © Copyright 2018 Bühler AG
2.3 Function
Product must be fed into the machine in metered quantities. In the inlet, the product
is evenly spread out over the entire sieve width of the machine. Oscillation of the
entire sieve box is achieved by means of vibrator motors. The sieve vibrations move
the product over the sieves and keep the sieves clean. This operating principle
allows high throughput rates and guarantees good sifting quality.
Fig. 2.4 DFTA 12
Fig. 2.5 DFTA 13 / DFTA 23
Aspiration Aspiration
4 fractions
2 fractions double flow system
(with blind bottom)
To Next Page
Loading...
