Production Start / Stop
SnackFix
TM
2018-05 V1.8 40
8.4 Switch on the complete Machine
Switch “Machine START” ON
With the touch button „Mach ON“ the complete line can be switched on. Hereby
the drives of the EGW1 & 2, cutter knife and Feeding & Discharge Belt are or
Contimix, Vibro and Dosing Pump and switched on.
8.5 Switch on individually
Use the push buttons “ON” on the several screens to switch on the drives you
wont to operate.
For example:
Switch Feeding belt ON
With the touch button „I” the feeding belt can be started individually.
Mach
ON
To Next Page
Loading...
