Screen Recipe
SnackFix
TM
2018-05 V1.8 37
7.2 Function „Recipe screen“:
Handling the recipes
Create a recipe with running parameters
If you run the machine with an actual setting, you can upload these pa-
rameters to an selected recipe to save them. First select a recipe. If nec-
essary “rename“ the recipe. Then “upload” the parameters. Check the rec-
ipe-name and change it when necessary.
Create a recipe in the recipe table and download to the PLC
Are no matching parameters in the PLC, you can also create a recipe and
download the parameters into the PLC. First select a recipe. If necessary
“rename“ the recipe. Write down the recipe-name and all other parameters
into the recipe table. “Save” the recipe. In the column “Value” the different
parameters are indicated. “Download” the parameters to the PLC and
press “restore” to update the recipe table.
To Next Page
Loading...
