Cutting Unit CU and EGW
SnackFix
TM
2018-05 V1.8 32
5.10 Screen limits EGW 1 & 2:
min. Limit
This input field represents the lower limit of the respective axis. Enter the lowest
speed for the drive.
max. Limit
This input field represents the highest limit of the respective axis. Enter the
maximum speed for the drive.
Factor
This input field represents the factor of scaling of the respective axis.
Main voltage
This input field represents the voltage for all frequency converter. Enter here the
actual voltage (EU 400V, USA 460V….) and press “save”.
To Next Page
Loading...
