Cutting Unit CU and EGW
SnackFix
TM
2018-05 V1.8 29
.
Clean
The screen „Clean“ is selected.
Runtime
The HMI stop the Runtime .
By touching the „Runtime“ button, the Operator Panel returns to the sys-
tem level. On this level all system settings (screen saver, date and time
setting etc.) can be changed.
Note!
The operating manual for the operating panel is part of the machine doc-
umentation.
Unauthorised changes on the system level can cause the
loss of the communication between the operator panel and
the SPS-Control!
Operating hours
The field "Operating hours" shows the full hours of operation of the ma-
chine.
To Next Page
Loading...
