Buhnen HB 710 - Servicing;Maintenance; Service Intervals; Cleaning

10
6 Servicing/maintenance
Danger!
Dangerduetoinadvertenttriggering.
Disconnectthecompressedairsupplybeforeallmaintenanceandservicework.
Danger! 
Voltagehazard.
Alloperationswhichnecessitateopeningthedevicemaybeperformedonlybyqualied
electricians.
Burn hazard!
Nozzle(1)andmoltenadhesivecanbeover390°F/200°Chot.Wearheat-resistant
gloveswhenperformingservicingandmaintenanceoperations.
6.1 Service intervals
Observethestatedserviceintervalstoensurealwayscorrectandreliableoperation:
Weekly: Inspectandifnecessarydraintheservice-unitwaterseparator(seeFig.6.1/1)
Checkthatallpartsarepresent,leak-freeandundamagedandallscrewsandlinessecurely
seated
Removeadhesiveresiduesandothercontaminants,especiallyontheinsideofthecover
MAX
max. level
press to drain
Fig. 6.1/1: Draining the water separator
6.2 Cleaning
• Donotuseaggressivecleaningagentsforcleaningthedevice.Thesemaydamage
devicecomponents.
Werecommendcleaningwithparafnoil.
• Replacecompletelypartswhicharenolongercleanable(e.g.becauseofburnt-onor
reactedhot-meltadhesive).Werecommendhavingthisworkdonebythemanufacturer
ordistributor.
• Removeresiduesofhot-meltadhesiveandothercontaminantsbymechanicalmeans
only,e.g.withacloth,softbrush,woodenspatulaorsimilar.
Servicing/maintenance