Burkert 2300 - GENERAL INFORMATION; Contact address; Warranty; Information on the internet

7
General information
4 GENERAL INFORMATION
4.1 Contact address
Germany
BürkertFluidControlSystem
SalesCentre
Christian-Bürkert-Str.13-17
D-74653Ingelngen
Tel.+49(0)7940-1091111
Fax+49(0)7940-1091448
E-mail:info@burkert.com
International
Contactaddressesarefoundonthenalpagesoftheprinted
operatingmanual.
YoucanalsondinformationontheInternetunder:
www.burkert.com
4.2 Warranty
Thewarranty is onlyvalidif the device is usedasauthorized in
accordancewiththespeciedapplicationconditions.
4.3 Information on the internet
TheoperatinginstructionsanddatasheetsforType2300canbe
foundontheInternetat:www.burkert.com
5 PRODUCT DESCRIPTION
5.1 General description
The2/2-wayangle-seatcontrolvalveType2300issuitablefor
liquidandgaseousmedia.
Itusesneutralgasesorair(controlmedia)tocontroltheow
ofwater,alcohol,oil,fuel,hydraulicuid,salinesolution,lye,
organicsolventandsteam(owmedia).
Theoperationoftheangle-seatcontrolvalveType2300ispos-
sibleonlyincombinationwithancontrolunit.Possiblecontrol
unitsare:
    PositionerType8692,8694and8696
ProcesscontrollerType8693
5.2 Versions
Thereare2versionsoftheangle-seatcontrolvalveType2300.
• Standardversion–withoutseparateExtypelabel.
Thestandardversionmustnotbeusedinthepotentially
explosivearea.
• Exversion–withseparateExtypelabel.
TheExversionmaybeusedinthepotentiallyexplosivearea.
Indoingso,observethespecicationsontheseparateExtype
labelandtheadditionalinformationenclosedwiththedevice
togetherwithsafetyinstructionsfortheExarea.
english
Type 2300