Burkert 2300 - PACKAGING, TRANSPORT, STORAGE

43
Packaging, transport, storage
12.2 Installation tools
OnlyforPEEKspindleguide:
Installation wrench for packing gland
(Series-productionstatusuntilApril2012)
Installation wrench Order no.
Spindlediameter10mm 665 700
Spindlediameter14mm 665 701
Tab. 26: Installation wrench for PEEK spindle guide
Modied socket wrench for packing gland
(SeriesproductionstatussinceApril2012)
AF
Socket wrench Orice DN AF Order no.
Spindle∅ 10 mm 15 19 683 220
Spindle∅ 10 mm 20–32 21 683 222
Spindle∅ 14 mm 25–50 21 683 223
Tab. 27: Modied socket wrench
Onlyforactuatorwithouthexagon:
Special wrench for rotating the actuator
(Series-productionstatusuntilendof2011)
Order no. 665 702
Tab. 28: Special wrench for actuator without hexagon
Ifyouhaveanyqueries,pleasecontactyourBürkert
salesoce.
13 PACKAGING, TRANSPORT,
STORAGE
NOTE!
Transport damages!
Inadequatelyprotectedequipmentmaybedamagedduring
transport.
• Duringtransportationprotectthedeviceagainstwetanddirt
inshock-resistantpackaging.
• Avoidexceedingordroppingbelowthepermittedstorage
temperature.
Incorrect storage may damage the device.
• Storethedeviceinadryanddust-freelocation!
• Storagetemperature-20...+65°C.
Damage to the environment caused by device components
contaminated with media.
▶ Disposeofthedeviceandpackaginginanenvironmentally
friendlymanner.
▶ Observeapplicableregulationsondisposalandthe
environment.
Note:
Observenationalwastedisposalregulations.
english
Type 2300