12 of 166
2.4.4 Cleaning
DANGER
Electrical shock hazard
Disconnect the DIGIFORCE
®
9311 from the power supply before cleaning.
Disconnect the DIGIFORCE
®
9311 from the power supply and use a slightly damp cloth for cleaning the
unit.
NOTICE
Do not immerse the DIGIFORCE
®
9311 in water or hold it under running water. Do not
use strong cleaning agents as these may damage the DIGIFORCE
®
9311. Use a
slightly damp cloth to clean the DIGIFORCE
®
9311.
2.5 Personnel
Personnel must be familiar with the relevant regulations. They must follow these regulations. Only trained
personnel who are familiar with the applicable safety regulations are permitted to operate the
DIGIFORCE
®
9311.
burster is happy to provide your operating personnel with training on the DIGIFORCE
®
9311. To find out
more, please look at our range of services at www.burster.com
.
2.6 Contents of pack
The following components are supplied:
• DIGIFORCE
®
9311
• Operation manual including burster software DVD
• Warranty document
• Test certificate
To Next Page
Loading...
Need help?
General