Bush BR320DABC - DAB Radio Tuning and Settings; Station Scanning and Manual Tuning; Dynamic Range Control (DRC)

BR320DABC
24
Scanning Stations
Press MENU button, turn SCROLL/SELECT knob to select “Scan”, and then press
SCROLL/SELECT knob to full scan.
Manual Tune
This can help you when adjusting your antenna or when adding stations that were missed while
auto tuning.
1. Press MENU button, turn SCROLL/SELECT knob to select “Manual tune”, and then press
SCROLL/SELECT knob to confirm, the display will show the channel number and frequency.
2. Turn SCROLL/SELECT knob to select the channel you wanted, and then press
SCROLL/SELECT knob to confirm. (Visit:
www.digitalradioplus.com.au to learn more channel
and frequency of DAB stations.)
→
# Note: If there is a multiplex corresponding to this channel and frequency, then the display will show a
tuning meter with the signal strength and the multiplex name after a few seconds. The new stations will
be added to station list automatically.
3. To playing the station, first press BACK button repeatedly to exit manual tune.
Prune Invalid
You may remove all unavailable stations from the station list.
1. Press MENU button, turn SCROLL/SELECT knob to select “Prune invalid”, and then press
SCROLL/SELECT knob to confirm.
2. Turn SCROLL/SELECT knob to select “YES”, and then press SCROLL/SELECT knob to
confirm removing all invalid stations.
DRC (Dynamic Range Control) value
If you are listening to music with high dynamic range in a noisy environment (for example classical
music while cooking), you may wish to compress the audio dynamic range. This makes quiet
sounds louder and loud sounds quieter
1. Press MENU button, turn SCROLL/SELECT knob to select “DRC”, and then press
SCROLL/SELECT knob to confirm.
2. Turn SCROLL/SELECT knob to select “DRC high”, “DRC low” or “DRC off”, and then press
SCROLL/SELECT knob to confirm.