Software Update – Over the network
From time to time, your radio may make software upgrades available with bug fixes and/or
additional features.
If your radio detects that newer software is available, it will ask if you want to go ahead with an
update. If you agree, the new software is then downloaded and installed.
After a software upgrade, all user settings are maintained.
C A U T I O N
Before starting a software upgrade, ensure that your radio is plugged into a stable mains power
connection. Disconnecting power during a software update may permanently damage the unit.
1. Press MENU button - Main menu - System settings - Software update, press
SCROLL/SELECT knob to confirm.
2. Turn SCROLL/SELECT knob to select “Auto-check setting”, your radio will check periodically
for new version software.
3. Turn SCROLL/SELECT knob to select “Check now”, your radio will now to check new version
software and automatically upgrade the detected new version software.
Setup Wizard
When this unit is started for the first time, it runs through a setup wizard to configure settings for
date/time and network. Once this has finished, the system is ready to use in most modes.
Redo setup wizard will not erase user settings such as searched stations and presets.
1. Press MENU button - Main menu - System settings - Setup wizard, press
SCROLL/SELECT knob to confirm.
2. Turn SCROLL/SELECT knob to select “YES”, and then press SCROLL/SELECT knob to
confirm.
Viewing System Info
This information may be requested when dealing with technical support issues.
1. Press MENU button - Main menu - System settings - Info, press SCROLL/SELECT knob to
confirm.
2. Turn SCROLL/SELECT knob to view “SW version”, “Spotify version”, “Radio ID” and “Friendly
Name”.
To Next Page
Loading...
