Bush BR320DABC - System Settings: Equaliser and Network; Adjusting Sound Equaliser; Network Configuration

BR320DABC
32
Setting Equaliser
This feature enables you to choose a sound equalization profile. Each of the equalization setting
will change the tone of the sound from your radio when selected.
1. Press MENU button - Main menu - System settings - Equaliser, and then press
SCROLL/SELECT knob to confirm.
2. Turn SCROLL/SELECT knob and then press it to select a profile through Normal, Flat, Jazz,
Rock, Movie, Classic, Pop, News and My EQ.
3. To set up My EQ, select “My EQ profile setup”, and then press SCROLL/SELECT knob to
confirm. Turn SCROLL/SELECT knob to select Bass, Treble or Loudness, and then press
SCROLL/SELECT knob to confirm. Turn SCROLL/SELECT knob to change the value of
Bass, Treble or Loudness, and then press SCROLL/SELECT knob to confirm. Press BACK
button, display will show “Save changes”. Turn and press SCROLL/SELECT knob to select
“YES” to save changes.
Network Setup
Users encountering networking issue may find these options useful for diagnosing and fixing
network problems.
1. Press MENU button - Main menu - System settings - Network, press SCROLL/SELECT
knob to confirm.
2. Turn SCROLL/SELECT knob to select your preferred network setting option:
Network wizard:
Scan for available networks
PBC Wlan setup:
Set up a WPS encrypted network (only support the router
uses WPS 2.0)
View settings.:
View network settings such as MAC address, Wlan
region, IP address etc.
Manual settings:
Set wireless connection
Network profile:
List of registered networks or delete some of unwanted
networks
Keep network connected:
Keep network connected in DAB, FM, Bluetooth, Aux in
and standby modes
3. Press SCROLL/SELECT knob to confirm your setting.