BUTZBACH STAE - Tail door (optional)

54 pages

Save Page as PDF

To Next Page

To Previous Page

Design and function

Butzbach GmbH Industrietore Original operating manual sliding doors_V1 13/01/2021 16

5.2.2 Tail door (optional)

Figure 2 Mechanical design of the tail door

Legend

01 Door leaf

06 Top door panel

02 Strut (emergency operation)

07 Safety rail

03 Hand crank (emergency operation)

08 Console

04 Bottom door panel

09 Drive unit

05 Standard door panel

Main Page

Table of Contents3
Preface7
About this Manual7
Target Groups7
Reading the Manual7
Content of this Manual7
Storing the Manual8
Symbol Explanation8
Safety9
Intended Use9
Improper Use9
Safety Information for the System9
Basic Safety Measures10
Safety Measures When Carrying out Maintenance and Service Work12
Operator Obligations12
Requirements of the Operating Personnel12
Safety Devices13
Other Risks15
Regular Operation15
Other Risks Due to Human Error15
Other Risks During Maintenance Work16
Risks During Manual Operation17
Transporting and Storage19
Design and Function20
Functioning of the Sliding Door System20
Functioning of the Electrically Operated Sliding Door System (STAE)20
Functioning of the Telescopic Sliding Door System (STTE)20
Functioning of a Radial Door System (STRE)20
Mechanical Design21
Gate System21
Tail Door (Optional)22
Door Leaf Design (View from Inside)23
Door System Construction24
Sliding Door System Design24
Steel Profile Frames24
Door Fillings24
Fiberglass Door Panels24
Polycarbonate Door Panels24
Sandwich Door Panels24
Row of Windows (Optional)25
Window (Optional)25
Door Base25
Tail Door (Optional)25
Truck Door (Optional)26
Pass Door(S) (Optional)26
Safety Edge Control27
Drive Mechanism27
Emergency Operation28
Control and Display Elements29
Control Elements for STAE and STTE29
Control Cabinet Standard29
Main Switch31
Control Voltage" Key Switch31
Track Heating Dial (Optional)31
Key Switch for Bypassing Wind Sensor (Optional)31
Operator Panel Standard32
Push Button (Standard Speed)32
EMERGENCY STOP Button32
Operator Panel with Creep Mode (Optional)33
Dial for Creep Mode (Optional)33
Display Elements34
Definition and Placement34
Control Voltage" Indicator Light34
Orange Indicator Light34
BMA Activated" and "BMA Door Leaf Position X" Indicator Lights (Optional)35
Door System Authorised" Indicator Light (Optional)35
Collective Error Message" Indicator Light (Optional)35
Track Heating On" Indicator Light (Optional)35
SKS Activated" Indicator Light (Optional)36
Door Closed" Indicator Light (Optional)36
Doors of Door Leaf X Open" Indicator Light (Optional)36
Wind Speed > 70 Km/H" Indicator Light (Optional)36
Display (SIMATIC LOGO) (Optional)37
Operation38
System Operation38
Dead Man's Switch Control38
Automatic Operation (Optional)39
Turning off the System39
Emergency Operation40
Switching to Manual Operation40
Towing a Door Leaf with a Tow Bar (Optional)41
Care and Cleaning43
Cleaning the Drainage System43
Cleaning the Bottom Tracks43
Cleaning and Care of the Door Surface43
Measures During the Winter44
Maintenance and Inspection45
Fundamentals for Testing Power-Operated Doors45
Safety Requirements45
Technical Rule ASR A1.745
Qualified Professional45
Annual Testing46
Maintenance and Inspection Work46
Inspection of Safety Components46
Testing by a Qualified Professional47
Maximum Wear of the Sliding Door Wheels47
Inspection and Maintenance Plan for Sliding Doors48
Malfunctions and Repair50
Definitions50
Malfunction50
Repair50
Objective50
Malfunctions and Corrective Actions (Sliding Door)50
Dismantling and Disposal52
Dismantling of the System52
Disposal of the System52
Customer Service Address52
Door Data52
Index53

BUTZBACH STAE - Tail door (optional)

Table of Contents

Related product manuals