BWT Bewazon VULW 45 - 13 Decommissioning and Disposal; Decommissioning, Temporary; Decommissioning, Permanent; Disposal

EN
43
13.3 Disposal
NOTICE
►The product must not be disposed of with
household waste.
►At the end of the product's life cycle, ensure
that it is properly disposed of or recycled.
►Observe the legal disposal guidelines for the
country in which the product is used.
►The following materials are used in the pro-
duct: metal, plastic, electronic components.
Disposal of transport packaging
Returning the packaging into the material cycle saves raw materials and
reduces the amount of waste. Your dealer will take the packaging back.
Disposal of the old device
Do not dispose of your old appliance with household waste. Use the
o󰀩cialcollectionandreturnpointsforthereturnandrecyclingofelec-
trical and electronic equipment at local authorities or dealers. You are
legally responsible for deleting any personal data on the old device to
be disposed of.
Disposal of used batteries
Batteries must never be disposed of with household waste. Used bat-
teriesthatarenotrmlyenclosedbythedevicemustberemovedand
disposed of at a suitable collection point (e.g. retail outlet), where they
can be handed over free of charge.
Disposing of electric discharge lamps
The products we deliver to you (Bewades electric discharge lamps)
areclassiedattheregistrationdepartmentasB2Bproducts.Youare
responsible for proper disposal at the end of the lamps’ service life.
Ensure environmentally sound disposal in accordance with the Electrical
and Electronic Equipment Act (ElektroG) (WEEE reg. no. DE 80428986).
13 Decommissioning and Disposal
13.1 Decommissioning, temporary
For temporary decommissioning, please contact our customer service:
BWT Wassertechnik GmbH
Industriestrasse 7
D-69198 Schriesheim
Phone: +49/6203/730
Fax: +49/6203/73102
E-Mail: bwt@bwt.de
13.2 Decommissioning, permanent
For permanent decommissioning, observe the national regulations of
the country in which the device is being used. The materials used are:
Metals, plastics, glass
DANGER!
High voltage
Risk of death by electric shock!
►Only qualied sta󰀨 may remove the unit.
►Disconnect the unit from the power supply
before any disassembly work.
►Discharge live components through earthing.
►Wear personal protective equipment.