BWT STARDECK INEO - Separating Pit Wall; Description of the Product; Mounting the Pit Wall Mounting Flanges; Assembling the Separating Pit Wall

PROTECTION & SAFETY
22 2021/07 - Version: C -
Code : 34681
SEPARATING PIT WALL
1. Description of the product
2. Mounting the pit wall mounting flanges
The vertical profiles are fastened to the beam mounting units.
3. Assembling the separating pit wall
Avoid assembling the pit wall on very windy days.
3.1. Straight wall
The various panels fit together by a tongue and
groove mechanism (sliding). Orient the panels
such that the notch faces the cover pit for aesthetic
purposes.
Ref Description Qty
1
Pit wall mounting flange
2
2
Straight separating pit wall
1
3
Separating pit wall cut to fit shaped
walls (e.g. trapezoidal)
1
Ref Description Qty
1 Inéo beam shoe mounting unit -
2 Beam shoe -
3 Pit wall vertical profile, LH + RH 1+1
4 HSHC screw M 8 x 10 A4 SS 4
5 Washer Z 8 A4 SS 4