35 2021/07 - Version: C -
BEAM
Product function
Hold and support the duckboarding.
Bear the weight of a person.
Guide the slat apron during opening and closing.
Compliance with standards
Complies with the standard NF P90-308
Restrictions of use
The pool must comply with the stipulations of the AFNOR AC P90-321 agreement in terms of position tolerance.
The beams and brackets are compatible with Stardeck Inéo automatic covers.
The beams and brackets are intended to support standard duckboarding from Procopi:
‐ Duckboarding 680x500
‐ Duckboarding 730x500
Safety recommendations and advice
Respect the assembly instructions.
The beams and brackets are designed to bear the weight of a person.
1. Beams
Position the beams in the beam mounting units.
Make that the beam is correctly oriented in the mounting units
cover passes
and the beam
side
To Next Page
Loading...
