BWT STARDECK INEO - Adjustable Strap at the End of the Pool; Strap Configurations; Stainless Steel, Fixed Hasp Fastener

PROTECTION & SAFETY
31 2021/07 - Version: C -
Code : 34681
2.9. Adjustable strap at the end of the pool
2.9.1. Strap configurations
Overflow pool with buffer tank Pool with beach entry deck
Overflow pool with buffer tank Pool with beach entry deck
To protect the leaktightness of the waterproofing finish, use straps with a fixed, stainless steel hasp. Install an
adjustable strap opposite each of the cover apron’s safety straps.
CAUTION
French regulations require the installation of straps to hold the cover closed.
Do not forget to release the straps before rolling the cover up, failure to do so could cause
significant damage.
2.9.2. Stainless steel, fixed hasp fastener
Ref Description Qty
1 Protective sleeve 1
2 Strap and cam buckle 1
3 Hinged stainless steel carabiner 1
4 Fixed hasp 1
5 Fixed hasp gasket 4
6
Nylon S8 bushing
4
7 Pozidrive countersunk screw ST
5.5x50 SS A4
4
Strap threading