■ When the vehicle travels smoothly, the seat belt will be pulled
out or retracted as the passenger moves slowly and stably to
allow the passenger to move freely.
■ If the seat belt gets locked up due to excessively fast retraction,
pull the seat belt forcibly and then loosen it to smoothly retract
the seat belt.
Pretensioning and force limitation functions of seat belt (if any):
If the vehicle suffers a severe frontal collision and the condition to
trigger the pretensioner is met, the pretensioner retracts part of the
seat belt rapidly and locks it up to enhance the protection for
passengers. The force limiter limits the restraining force applied by
the seat belt to passengers to a certain range, avoiding injury to
passengers due to excessive restraining force.
Use of Seat Belt
1. Adjust the seat to a proper position and adjust the backrest to a
proper tilt. (refer to the adjustment of front seat (if any))
2. Adjust the position of a
three-point seat belt.
■ Keep the correct sitting
posture and pull out the
shoulder belt diagonally
across the entire shoulder
without contacting the neck
or falling from the shoulder.
The lap belt should cross
the hip as low as possible.
To Next Page
